Pneumatically (air) Operated Archives

Pneumatically (air) operated Industrial Vacuum Cleaner for the recovery of large quantities of coolant/oil mixed with some metal chips.
The Single or Twin Venturi powerhead with 6mm air jets is mounted directly on the recovery tank.
The internal volume of the recovery tank is 10.6 cubic feet (300 liters). There is a basket in the upper part of the recovery tank which collects the metal chips.
The basket can hold 3.5 cubic feet (100 liters) of metal chips which allows 45 Gal. (200 liters) of coolant/oil to be recovered in the lower part of the recovery tank
If the basket is removed (or if it is not used), then 78 gal. (300 L) of coolant or cutting oil can be recovered.
The Coolant/Oil is emptied using the 2.5" drain valve
Optional Electrically Operated Discharge Pump is available for emptying the recovered coolant/oil
Four 5" (125mm) wheels allow for maximum maneuverability
A floater (liquid cut-off) is installed under the powerhead to prevent overfilling

Specs	112616	112618
Model Name	CS-300L (COOLANT/OIL) SINGLE VENTURI	CS-300L (COOLANT/OIL) TWIN VENTURI
Type (Powerhead)	Pneumatic	Pneumatic
Venturi	Single	Twin
Venturi (diam.)	6 mm	6 mm
Minimum Compressor	15 HP	30 HP
Air Line Size (Diam.)	1/2 "	1 "
Input Air Volume	45 CFM	100 CFM
Input Air Pressure	80 PSI	100 PSI
Air Flow	120 CFM	195 CFM
Vacuum Pressure	170 " H₂0	230 " H₂0
Suction Inlet	90 mm	90 mm
Cart Type	Carriage Base (CB)	Carriage Base (CB)
Filter Cleaning	None	None
Wet Recovery Capacity	40 Gal	40 Gal

Pneumatically operated Industrial Vacuum Cleaner with Self-Dumping Overturning Hopper for the recovery of large quantities of metal chips mixed with some oil/coolant.
The Single or Twin Venturi powerhead with 6mm air jets is mounted directly on the hopper.
The internal volume of the hopper is 10.6 cubic feet (300 L). A screen inside the hopper separates the upper part from the lower part. It can recover 5.3 cubic feet (150 L) of metal chips and 40 gal. (150 L) of oil/coolant.
The metal chips are separated from the oil inside the hopper. The metal chips are recovered in the upper part of the hopper and the oil is deposited at the bottom of the hopper. The screen can be removed and 300L (10.6 cubic feet) of chips can be recovered.
The oil is emptied using the 1" drain valve.
The recovered metal chips are easily emptied using a forklift to lift and dump the contents of the hopper. There is no manual lifting required. The manually operated dumping mechanism is easy to use.
Four 5" (125mm) wheels allow for maximum maneuverability
A washable Main Cloth Filter is installed upstream from the venturi

Designed for the recovery of Chips mixed with Coolant
Pneumatically (air) operated
Can run continuously without overheating or wear
Sieve Basket separates chips from coolant. Chips stay in the basket and coolant is recovered in the recovery tank
Liquid recovery capacity of 6.08 gal. (23L) of coolant in a recovery tank and 7.13 gal. (27L) of chips in a Sieve Basket.
Filtration system consists of a main filter and mist arrestor pack
High density polyethylene recovery tank is corrosion resistant and oil resistant
Mounted on a Tilting Cart (TC) for easy disposal of recovered materials.
Silent operation
Liquid Level Indicator included
Drain Hose Assembly included

Specs	112350
Model Name	HOGOIL-57L (TC) AIR
Type (Powerhead)	Pneumatic
Venturi	Single
Venturi (diam.)	6 mm
Minimum Compressor	15 HP
Air Line Size (Diam.)	1/2 "
Input Air Volume	45 CFM
Input Air Pressure	80 PSI
Air Flow	125 CFM
Vacuum Pressure	190 " H₂0
Suction Inlet	2 "
Cart Type	Tilt Cart (TC)
Filter Cleaning	None
Recovery Capacity - Sieve Basket	7.13 Gal
Wet Recovery Capacity	6.08 Gal

Ideal for the recovery of small chips, turnings, filings, shavings and other similar sized debris of metal, wood, or plastic resulting from machining, woodworking, or other similar manufacturing processes
This sturdy portable dust collector features a removable chip clean-out drawer, with 4-gallon (16 liter) recovery capacity, for easy disposal of chips and collected debris.
Incoming air from the dual 3" inlets must pass through a series of deflectors to separate the chips from the airflow. Two reducer adaptors (3" to 2") are included
An industrial-duty 1.5 HP 230V Single Phase, direct-drive motor powers the aluminum impeller to produce 856 CFM of airflow
Two pleated panel filters are installed at the exhaust.
Mounted on 4 casters for easy maneuverability and with two handles for easy placement and positioning. Two of the four wheels have locking brakes.
The MDC-502 will help you keep your shop clean and safe.