• CR-1200D

    Features

    • New Generation cleanroom vacuum cleaner for dry recovery
    • Designed specifically for the pharmaceutical, semiconductor and microelectronics industry
    • Compatible with ISO Class 4 cleanroom conditions as defined in ISO 14644-1 (Class 10 as per FED STD 209E)
    • Complete Stainless Steel construction with electropolished finish to remove surface contamination. Autoclavable up to 121°C (except for the powerhead)
    • Powerful suction and quiet operation
    • Compliant with GMP standards
    • Each vacuum is aerosol leak tested before leaving our factory
    • Multiple stages filtration system. Simple and reliable filter-change
    • Equipped with an Upstream HEPA Filter and a Downstream ULPA Filter. HEPA Filter is H14 as per EN 1822. ULPA Filter is U15 as per EN 1822. The Upstream HEPA protects the motor and prevents ultra-find particles from entering. The ULPA Filter is installed at the exhaust to ensure cleanroom compatibility
    • ULPA Filter - With an efficiency of 99.999% on 0.12 micron. Filtration efficiency of 99.9995% on 0.18 micron. Tested: IEST-RP-CC001 - Included
    • HEPA Filter - With an efficiency of 99.995% on 0.3 micron. Tested: IEST-RP-CC001
    • The primary filters consist of a disposable collection bag (for dry recovery) and a primary filter made of polyester. Filtration Class M as per IEC 60335-2-69
    • The recovery tank is made of Type 316 Stainless Steel and is fully autoclavable (up to 121°C) including the wheels
    • A variety of accessories are available, including: autoclavable hoses & tools and also ESD safe hoses and tools

    Technical Specs

    Specs 110134A
    Model Name CR-1200D
    Type (Powerhead) Electric
    Voltage 120 V
    Hertz 60 Hz
    Phase Single
    Wattage 1000 W
    Power 1.3 HP
    Amperage 8.5 amps.
    Air Flow 120 CFM
    Vacuum Pressure 95 " H20
    Sound Level 70 dB(A)
    Plug Type 120V
    Suction Inlet 1.5 "
    Cart Type 4 Wheel Dolly (4W)
    Dry Recovery - Tank 4 Gal
    Dry Recovery - Disposable Filter Bag 2 Gal
    Cord Length 35 ft.
       
    DOWNLOAD BROCHURE

  • CR-1300WD

    Features

    • New Generation cleanroom vacuum cleaner for wet & dry recovery
    • Designed specifically for the pharmaceutical, semiconductor and microelectronics industry
    • Compatible with ISO Class 4 cleanroom conditions as defined in ISO 14644-1 (Class 10 as per FED STD 209E)
    • Complete Stainless Steel construction with electropolished finish to remove surface contamination. Autoclavable up to 121°C (except for the powerhead)
    • Two stage By-Pass motor provides powerful suction and quiet operation
    • Compliant with GMP standards
    • Each vacuum is aerosol leak tested before leaving our factory
    • Multiple stages filtration system. Simple and reliable filter-change
    • Equipped with two Downstream ULPA Filters. ULPA filters are U15 as per EN 1822. One ULPA filter is installed at the working air exhaust and the other is installed at the cooling air exhaust. Two downstream ULPA filters is the only way to ensure cleanroom compatibility of the by-pass motor
    • ULPA Filter - With an efficiency of 99.999% on 0.12 micron. Filtration efficiency of 99.9995% on 0.18 micron. Tested: IEST-RP-CC001 - Included
    • The primary filters consist of a disposable collection bag (for dry recovery) and a primary filter made of polyester. Filtration Class M as per IEC 60335-2-69
    • The recovery tank is made of Type 316 Stainless Steel and is fully autoclavable (up to 121°C) including the wheels
    • The Stainless Steel floater (liquid cut-off) is detachable for easy dismantling and maintenance. It is also autoclavable (up to 121°C)
    • Easy storage of the power cord on the powerhead
    • A variety of accessories are available, including: autoclavable hoses & tools and also ESD safe hoses and tools

    Technical Specs

    Specs 113200A
    Model Name CR-1300WD
    Type (Powerhead) Electric
    Voltage 120 V
    Hertz 60 Hz
    Phase Single
    Wattage 1200 W
    Power 1.6 HP
    Amperage 10.5 amps.
    Air Flow 110 CFM
    Vacuum Pressure 107 " H20
    Sound Level 65/75 dB(A)
    Plug Type 120V
    Suction Inlet 1.5 "
    Cart Type 4 Wheel Dolly (4W)
    Dry Recovery - Tank 10 Gal
    Dry Recovery - Disposable Filter Bag 5 Gal
    Wet Recovery Capacity 10 Gal
    Cord Length 35 ft.
       
    DOWNLOAD BROCHURE

  • CR-1400WD/CR-1400D

    Features

    • New Generation cleanroom vacuum cleaner available in dry only or in wet & dry configurations
    • Designed specifically for the pharmaceutical, semiconductor and microelectronics industry
    • Compatible with ISO Class 4 cleanroom conditions as defined in ISO 14644-1 (Class 10 as per FED STD 209E)
    • Complete Stainless Steel construction with electropolished finish to remove surface contamination. Autoclavable up to 121°C (except for the powerhead)
    • Two stage By-Pass motor provides powerful suction and quiet operation
    • Compliant with GMP standards
    • Each vacuum is aerosol leak tested before leaving our factory
    • Multiple stages filtration system. Simple and reliable filter-change
    • Equipped with two Downstream ULPA Filters. ULPA filters are U15 as per EN 1822. One ULPA filter is installed at the working air exhaust and the other is installed at the cooling air exhaust. Two downstream ULPA filters is the only way to ensure cleanroom compatibility of the by-pass motor
    • ULPA Filter - With an efficiency of 99.999% on 0.12 micron. Filtration efficiency of 99.9995% on 0.18 micron. Tested: IEST-RP-CC001 - Included
    • The primary filters consist of a disposable collection bag (for dry recovery) and a primary filter made of polyester. Filtration Class M as per IEC 60335-2-69
    • The recovery tank is made of Type 316 Stainless Steel and is fully autoclavable (up to 121°C) including the wheels
    • The Stainless Steel floater (liquid cut-off) is detachable for easy dismantling and maintenance. It is also autoclavable (up to 121°C). The autoclavable floater is standard for the CR-1400WD and optional for the CR-1400D
    • Easy storage of the power cord on the powerhead
    • A variety of accessories are available, including: autoclavable hoses & tools and also ESD safe hoses and tools

    Technical Specs

    Specs 113203A 113204A 113206A
    Model Name CR-1400D CR-1400WD CR-1400WD (DT) MRAC
    Type (Powerhead) Electric Electric Electric
    Collection Type Dry only Wet & Dry Wet & Dry
    Voltage 120 V 120 V 120 V
    Hertz 60 Hz 60 Hz 60 Hz
    Phase Single Single Single
    Wattage 1200 W 1200 W 1200 W
    Power 1.6 HP 1.6 HP 1.6 HP
    Amperage 10.5 amps. 10.5 amps. 10.5 amps.
    Air Flow 110 CFM 110 CFM 110 CFM
    Vacuum Pressure 107 " H20 107 " H20 107 " H20
    Sound Level 65/75 dB(A) 65/75 dB(A) 65/75 dB(A)
    Plug Type 120V 120V 120V
    Suction Inlet 1.5 "
    Cart Type Detachable Tank (DT) Detachable Tank (DT) Detachable Tank (DT)
    Dry Recovery - Tank 10 Gal 10 Gal 10 Gal
    Dry Recovery - Disposable Filter Bag 5 Gal 5 Gal 5 Gal
    Wet Recovery Capacity Gal 5 Gal 5 Gal
    Cord Length 35 ft. 35 ft. 35 ft.
       
    DOWNLOAD BROCHURE

Copyright Southern Cleaning 2021
Online Enquiry
close slider

    Your Name (required)

    Your Email (required)

    Phone

    Your Message

    Go to Top