• New Generation cleanroom vacuum cleaner for dry recovery
  • Designed specifically for the pharmaceutical, semiconductor and microelectronics industry
  • Compatible with ISO Class 4 cleanroom conditions as defined in ISO 14644-1 (Class 10 as per FED STD 209E)
  • Complete Stainless Steel construction with electropolished finish to remove surface contamination. Autoclavable up to 121°C (except for the powerhead)
  • Powerful suction and quiet operation
  • Compliant with GMP standards
  • Each vacuum is aerosol leak tested before leaving our factory
  • Multiple stages filtration system. Simple and reliable filter-change
  • Equipped with an Upstream HEPA Filter and a Downstream ULPA Filter. HEPA Filter is H14 as per EN 1822. ULPA Filter is U15 as per EN 1822. The Upstream HEPA protects the motor and prevents ultra-find particles from entering. The ULPA Filter is installed at the exhaust to ensure cleanroom compatibility
  • ULPA Filter – With an efficiency of 99.999% on 0.12 micron. Filtration efficiency of 99.9995% on 0.18 micron. Tested: IEST-RP-CC001 – Included
  • HEPA Filter – With an efficiency of 99.995% on 0.3 micron. Tested: IEST-RP-CC001
  • The primary filters consist of a disposable collection bag (for dry recovery) and a primary filter made of polyester. Filtration Class M as per IEC 60335-2-69
  • The recovery tank is made of Type 316 Stainless Steel and is fully autoclavable (up to 121°C) including the wheels
  • A variety of accessories are available, including: autoclavable hoses & tools and also ESD safe hoses and tools

Technical Specs

Specs 110134A
Model Name CR-1200D
Type (Powerhead) Electric
Voltage 120 V
Hertz 60 Hz
Phase Single
Wattage 1000 W
Power 1.3 HP
Amperage 8.5 amps.
Air Flow 120 CFM
Vacuum Pressure 95 ” H20
Sound Level 70 dB(A)
Plug Type 120V
Suction Inlet 1.5 “
Cart Type 4 Wheel Dolly (4W)
Dry Recovery – Tank 4 Gal
Dry Recovery – Disposable Filter Bag 2 Gal
Cord Length 35 ft.