• Immersion Separator “Wet (Water) Mix” – Only meant to be used with water (no oil)
  • Designed for the recovery and INERTIZATION of conductive and explosive dust, such as Aluminum, Magnesium, Zirconium and other commercial alloys, into a Liquid Immersion Bath
  • Legally certified explosion proof/dust ignition proof.
  • Precipitating Dust – complies with NFPA 484 method
  • Less than 10 Ohms of resistivity.
  • Coalescing Filter Element (CFE) for moisture removal
  • HEPA Filter – Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001. H14 by MPPS method as per EN 1822 and OSHA compliant. All of our HEPA Vacuum Cleaners are Aerosol Leak Tested before leaving our facility.
  • Electrically Operated
  • Stainless Steel Type 304 Interceptor Tank.
  • Recovery capacity of 11 lbs (5 Kg) of dust into 6.5 gallons (25 liters) of water (no oil)
  • Degassing Vent allows gas to be evacuated automatically from the unit
  • Portable and equipped with single or dual SD* suction hose connector.
  • Detachable Recovery Tank (DT) for easy disposal of recovered materials
  • Equipped with a Liquid Level Indicator.
  • Tiger-Vac® carries a large inventory of shrouded sanders, grinders, dustless drill kits along with a large suction port for maximum dust recovery
  • – OSHA Combustible Dust National Emphasis Program “NEP” NRTL approved – NRTL Certified US/Canada – Hazardous Locations as defined in NFPA 70 – Meets NFPA 484-2015 Guidelines.
  • At Tiger-Vac®, Safety has no compromise.

Technical Specs

Specs 113168A
Model Name EXP1-IT (63L) EX (CFE) HEPA
Type (Powerhead) Electric
TEFC Motor Yes
Voltage 120 V
Hertz 60 Hz
Phase Single
Wattage 1000 W
Power 1.3 HP
Amperage 9 amps.
Air Flow 132 CFM
Vacuum Pressure 69 ” H20
Sound Level 78/85 dB(A)
Plug Type Not Included
Suction Inlet 2 “
Cart Type Detachable Tank (DT)
Filter Cleaning None
Length 31 “
Width 24 “
Weight (Vacuum Only) 168 lbs.
Height 63 “
Cord Length 50 ft.