Portable High Pressure Dust Collectors for unclassified (general purpose) areas Archives

HEPA Filter - Optional with an efficiency of 99.995% on 0.3 micron. Tested: IEST-RP-CC001. H14 by MPPS method as per EN 1822 and OSHA compliant. All of our HEPA Vacuum Cleaners are Aerosol Leak Tested before leaving our facility.
For general housekeeping
Continuous Duty 3-Phase motor - 10-15 HP (11-15 kW)
To be used with a continuous Duty Power Unit (CDPU).
Static Dissipating and conductive.
Category 3/EPL Dc Zone 22 (Combustible Dust)
Automatic Purge System (APS) with either 4 aluminized spun bond filter cartridges or 4 socks. Equipped with 4 Fully Integrated Diaphragm Valves
For dry recovery only
Heavy Duty construction and powder coated. Also available in all stainless steel.
Detachable Recovery Tank (DT) for easy disposal of recovered materials
System is divided into 2 pieces - the Filtration System (FRS) and the Power Unit (CDPU).

HEPA Filter - Optional with an efficiency of 99.995% on 0.3 micron. Tested: IEST-RP-CC001. H14 by MPPS method as per EN 1822 and OSHA compliant. All of our HEPA Vacuum Cleaners are Aerosol Leak Tested before leaving our facility.
For general housekeeping
Continuous Duty 3-Phase motor. This induction motor does not contain Arcing Components
Continuous Duty Power Unit (CDPU) can be attached to a Filtration Recovery System (FRS)
Can be used as a mobile, or central unit.
Heavy Duty construction and powder coated. Also available in all stainless steel.
Equipped with 4 wheels for easy maneuverability
Forklift capability

Ideal for the recovery of bulky and lightweight scrap materials.
Can be connected to process machines
Continuous Duty Single or 3-Phase (TEFC) motor. This induction motor does not contain normally arcing components
Sight Glass installed to monitor collection bag capacity.
For dry recovery only
Powder coated steel construction. Stainless steel Type 304 available upon request.
Equipped with 4 wheels for easy maneuverability

Technical Specs

Specs	111550A1	111550A2	111550A5	111554A1	111554A2	111554A5
Model Name	SRV-55	SRV-55	SRV-55	SRV-55	SRV-55	SRV-55
Type (Powerhead)	Electric	Electric	Electric	Electric	Electric	Electric
TEFC Motor	Yes	Yes	Yes	Yes	Yes	Yes
Voltage	460 V	230 V	575 V	460 V	230 V	575 V
Hertz	60 Hz	60 Hz	60 Hz	60 Hz	60 Hz	60 Hz
Phase	Three	Three	Three	Three	Three	Three
Wattage	2600 W	2600 W	2600 W	3700 W	3700 W	3700 W
Power	3.5 HP	3.5 HP	3.5 HP	5 HP	5 HP	5 HP
Amperage	4.7 amps.	9.4 amps.	4 amps.	7.8 amps.	13.5 amps.	5.4 amps.
Air Flow	219 CFM	219 CFM	219 CFM	220 CFM	220 CFM	220 CFM
Vacuum Pressure	145 " H₂0	145 " H₂0	145 " H₂0	155 " H₂0	155 " H₂0	155 " H₂0
VRV Setting	110 " H₂0	110 " H₂0	110 " H₂0	120 " H₂0	120 " H₂0	120 " H₂0
Plug Type	Not Included	Not Included	Not Included	Not Included	Not Included	Not Included
Suction Inlet	2 "	2 "	2 "	2 "	2 "	2 "
Cart Type	4 Wheel Dolly (4W)	4 Wheel Dolly (4W)	4 Wheel Dolly (4W)	4 Wheel Dolly (4W)	4 Wheel Dolly (4W)	4 Wheel Dolly (4W)
Filter Cleaning	None	None	None	None	None	None
Dry Recovery - Tank	26 Gal	26 Gal	26 Gal	26 Gal	26 Gal	26 Gal
Width	25 "	25 "	25 "	25 "	25 "	25 "
Weight (Vacuum Only)	130 lbs.	130 lbs.	130 lbs.	165 lbs.	165 lbs.	165 lbs.
Height	41.5 "	41.5 "	41.5 "	41.5 "	41.5 "	41.5 "
Cord Length	50 ft.	50 ft.	50 ft.	50 ft.	50 ft.	50 ft.

Designed for the Remediation of wet/saturated Asbestos
To be connected to any power/suction unit
For wet and dry recovery
Drain valve opening, Ø2" (Ø50mm), located on the bottom of the recovery tank
Can be sold as a complete unit, including standard drum and dolly or as a Top Fill powerhead only.
Suction intake, Ø2.5" - can accept Ø50mm and Ø70mm suction hoses.
Mounted on a detachable 4-wheel dolly with ring and handles
Equipped with a special asbestos recovery Polyliner and retainer clip.
Optional tools and accessories.

Specs	112340
Model Name	STV-114L SEPARATOR FOR THE REMEDIATION OF ASBESTOS
Suction Inlet	2.5 "
Cart Type	4 Wheel Dolly (4W)
Filter Cleaning	None
Wet Recovery Capacity	23 Gal

Electrically operated Fully Automatic Stand Alone unit. Designed for general housekeeping applications
HEPA Filter - Optional with an efficiency of 99.995% on 0.3 micron. Tested: IEST-RP-CC001. H14 by MPPS method as per EN 1822 and OSHA compliant. All of our HEPA Vacuum Cleaners are Aerosol Leak Tested before leaving our facility.
Reverse Pulse System with (1) Aluminized Spun Bond Cartridge.
Stainless Steel version available.
Detachable Recovery Tank (DT) for easy disposal of recovered materials