• The UB-2200VECK has the power and performance of a large machine combined with portability needed for shops of all sizes. Connect it directly to your machines for “point of generation dust control”
  • Meets OSHA requirements by significantly reducing the amount of airborne particulate in your shop.
  • The UB-2200VECK provides more than enough airflow to collect particulate from multiple machines and is good for central installations
  • The motorized automatic filter cleaning system ensures that the canister filter is always ready for the next use. The optional remote control allows you to start the dust collector from anywhere in the shop.
  • Ideal Dust Extraction System for the woodworking industry and for other industries where fine fibrous airborne dust is a concern.
  • Innovative impeller design ensures a quiet operation.
  • Provides 1600 CFM of airflow; more than enough to collect particulates from multiple machines.
  • The cyclone separator system removes the particulate from the airflow before it enters the impeller
  • The dust collector is mounted on castors. It can be easily maneuvered around the shop.
  • 6″ suction inlet with Wye Connector with two x 4″ inlets
  • The 28 gallon steel drum is mounted on casters so it can easily be rolled away for emptying
  • The recovery drum has a window on the side so you can easily see when the drum is full.
  • A Polyliner Bag can be inserted in the recovery drum to facilitate emptying
  • The patented Bag Gripper is integrated in the recovery drum. It provides a constant negative pressure on the outside of the Polyliner keeping it pulled tightly against the walls of the recovery drum
  • The final stage of filtration is a canister filter with 1 micron efficiency which prevents fine dust from escaping into the shop
  • The canister filter is made of a pleated media and reinforced with steel mesh
  • Remote control included.

Technical Specs

Specs 113070A4-REM
Model Name UB-2200VECK
Type (Powerhead) Electric
TEFC Motor Yes
Voltage 230 V
Hertz 60 Hz
Phase Single
Wattage 1500 W
Power 2 HP
Amperage 9 amps.
Air Flow 1600 CFM
Vacuum Pressure 9.2 ” H20
Sound Level 76 dB(A)
Suction Inlet 6 ” x 4 ” x Two
Cart Type Carriage Base (CB)
Filter Cleaning Automatic Filter Cleaning
Dry Recovery – Tank 28 Gal
Filter Type Cartridge
Filter Surface Area 28 ft2
Length 39.5 “
Width 26.5 “
Weight (Vacuum Only) 288 lbs.
Height 67 “
Cord Length 10 ft.