• Immersion Separator “Wet (Water) Mix” – Only meant to be used with water (no oil).
  • Designed for the recovery and INERTIZATION of combustible dust into a Liquid Immersion Bath
  • Legally certified dust ignition protected by an OSHA approved Nationally Recognized Testing Laboratory (NRTL)
  • Coalescing Filter Element (CFE) for moisture removal
  • Electrically Operated
  • Recovery tank made of stainless steel type 304
  • Recovery capacity: 3.25 gallons (12.3 liters) of water is required in the recovery tank. The conductive recovery bag has a recovery capacity of 3 liters. One gallon (3.8 liters) of powder can be recovered directly in the tank if the conductive recovery bag is not used
  • Degassing Vent allows gas to be evacuated automatically from the unit
  • Equipped with a Liquid Level Indicator.
  • Includes a complete static dissipative tool kit

Technical Specs

Specs 113178A
Model Name C-10 EX (IT-40L) CFE HEPA
Type (Powerhead) Electric
Voltage 115 V
Hertz 60 Hz
Phase Single
Wattage 1207 W
Power 1.6 HP
Amperage 10.5 amps.
Air Flow 110 CFM
Vacuum Pressure 107 ” H20
Plug Type 120V
Suction Inlet 1.5 “
Filter Cleaning Liquid Immersion Bath
Length 19 “
Width 18 “
Height 35 “
Cord Length 35 ft.