• Features

    • Immersion Separator "Wet (Water) Mix" - Only meant to be used with water (no oil).
    • Designed for the recovery and INERTIZATION of combustible dust into a Liquid Immersion Bath
    • Legally certified explosion proof/dust ignition proof.
    • Coalescing Filter Element (CFE) for moisture removal
    • Pneumatically (air) operated. Can run continuously without overheating or wear
    • Recovery tank made of stainless steel type 304
    • Recovery capacity: 3.25 gallons (12.3 liters) of water is required in the recovery tank. The conductive recovery bag has a recovery capacity of 3 liters. One gallon (3.8 liters) of powder can be recovered directly in the tank if the conductive recovery bag is not used
    • Degassing Vent allows gas to be evacuated automatically from the unit
    • Equipped with a Liquid Level Indicator.
    • Includes a complete static dissipative tool kit

    Technical Specs

    Specs 113116
    Model Name ATEX-10A (IT-40L) CFE HEPA
    Type (Powerhead) Pneumatic
    Venturi Single
    Minimum Compressor 15 HP
    Air Line Size (Diam.) 1/2 "
    Input Air Volume 35-45 CFM
    Input Air Pressure 80 PSI
    Air Flow 110 CFM
    Vacuum Pressure 110 " H20
    Sound Level 68 dB(A)
    Suction Inlet 1.5 "
    Cart Type 4 Wheel Dolly (4W)
    Filter Cleaning Liquid Immersion Bath
    Length 19 "
    Width 18 "
    Height 34 "
       
    DOWNLOAD BROCHURE
  • Features

    • Hydrogen - Risk Free.
    • Immersion Separator "Wet Oil Mix" - Meant to be used with Mineral Oil or any other neutralizing liquid
    • Designed for the recovery and INERTIZATION of conductive and explosive dust, such as Aluminum, Magnesium, Zirconium and other commercial alloys, into a Liquid Immersion Bath
    • Legally certified explosion proof/dust ignition proof.
    • Less than 10 Ohms of resistivity.
    • Coalescing Filter Element (CFE) for moisture removal
    • HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001. H14 by MPPS method as per EN 1822 and OSHA compliant. All of our HEPA Vacuum Cleaners are Aerosol Leak Tested before leaving our facility.
    • Pneumatically (air) operated
    • Recovery capacity of 33 lbs. (15 Kg) of dust into 11.8 gallons (45 liters) of neutralizing liquid.
    • Stainless Steel body (type 304) and heavy duty powder coated cart.
    • Equipped with a Liquid Level Indicator.

    Technical Specs

    Specs 110416
    Model Name SS-IT (114L) EX (CFE) HEPA TWIN VENTURI
    Type (Powerhead) Pneumatic
    Venturi Twin
    Venturi (diam.) 5 mm
    Minimum Compressor 30 HP
    Air Line Size (Diam.) 1 "
    Input Air Volume 100 CFM
    Input Air Pressure 100 PSI
    Air Flow 195 CFM
    Vacuum Pressure 120 " H20
    Suction Inlet 2 "
    Cart Type Detachable Tank (DT)
    Filter Cleaning None
    Length 40 "
    Width 30 "
    Weight (Vacuum Only) 273 lbs.
    Height 79 "
       
    DOWNLOAD BROCHURE
  • Features

    • Hydrogen - Risk Free.
    • Immersion Separator "Wet Oil Mix" - Meant to be used with Mineral Oil or any other neutralizing liquid
    • Designed for the recovery and INERTIZATION of conductive and explosive dust, such as Aluminum, Magnesium, Zirconium and other commercial alloys, into a Liquid Immersion Bath
    • Legally certified explosion proof/dust ignition proof.
    • Less than 10 Ohms of resistivity.
    • Coalescing Filter Element (CFE) for moisture removal. HEPA Grade. 99.97% efficiency on 0.3 microns
    • Pneumatically (air) operated
    • Recovery capacity of 22 lbs. (10 Kg) of dust into 7.9 gallons (30 liters) of oil or any other neutralizing liquid.
    • Stainless Steel body (type 304) and heavy duty powder coated cart.
    • Detachable Recovery Tank (DT) for easy disposal of recovered materials
    • Equipped with a Liquid Level Indicator.
    • Tiger-Vac® carries a large inventory of shrouded sanders, grinders, dustless drill kits along with a large suction port for maximum dust recovery
    • Tiger-Vac® recommends the use of Mineral Oil with a viscosity of 10.5 cSt.

    Technical Specs

    Specs 113120-OIL
    Model Name SS-IT (85L) EX (CFE) SK HEPA WET (OIL) MIX
    Type (Powerhead) Pneumatic
    Venturi Single
    Venturi (diam.) 5 mm
    Minimum Compressor 15-25 HP
    Air Line Size (Diam.) 3/4 "
    Input Air Volume 45 CFM
    Input Air Pressure 80 PSI
    Air Flow 120 CFM
    Vacuum Pressure 120 " H20
    Suction Inlet 2 "
    Cart Type Detachable Tank (DT)
    Filter Cleaning None
    Length 40 "
    Width 24 "
    Weight (Vacuum Only) 207 lbs.
    Height 71 "
       
    DOWNLOAD BROCHURE
  • Features

    • Immersion Separator "Wet (Water) Mix" - Only meant to be used with water (no oil)
    • Designed for the recovery and INERTIZATION of conductive and explosive dust, such as Aluminum, Magnesium, Zirconium and other commercial alloys, into a Liquid Immersion Bath
    • Legally certified explosion proof/dust ignition proof.
    • Less than 10 Ohms of resistivity.
    • Coalescing Filter Element (CFE) for moisture removal
    • HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001. H14 by MPPS method as per EN 1822 and OSHA compliant. All of our HEPA Vacuum Cleaners are Aerosol Leak Tested before leaving our facility.
    • Pneumatically (air) operated
    • Recovery capacity of 22 lbs. (10 Kg) of dust into 7.9 gallons (30 liters) of water (no oil).
    • Stainless Steel body (type 304) and heavy duty powder coated cart.
    • Detachable Recovery Tank (DT) for easy disposal of recovered materials
    • Equipped with a Liquid Level Indicator.
    • Tiger-Vac® carries a large inventory of shrouded sanders, grinders, dustless drill kits along with a large suction port for maximum dust recovery

    Technical Specs

    Specs 113120
    Model Name SS-IT (85L) EX (CFE) SK HEPA WET (WATER) MIX
    Type (Powerhead) Pneumatic
    Venturi Single
    Venturi (diam.) 5 mm
    Minimum Compressor 15-25 HP
    Air Line Size (Diam.) 3/4 "
    Input Air Volume 45 CFM
    Input Air Pressure 80 PSI
    Air Flow 120 CFM
    Vacuum Pressure 120 " H20
    Suction Inlet 2 "
    Cart Type Detachable Tank (DT)
    Filter Cleaning None
    Length 40 "
    Width 24 "
    Weight (Vacuum Only) 207 lbs.
    Height 71 "
       
    DOWNLOAD BROCHURE
  • Features

    • Immersion Separator "Wet (Water) Mix" - Only meant to be used with water (no oil).
    • Designed for the recovery and INERTIZATION of conductive and explosive dust, such as Aluminum, Magnesium, Zirconium and other commercial alloys, into a Liquid Immersion Bath
    • Legally certified explosion proof/dust ignition proof.
    • Less than 10 Ohms of resistivity.
    • Coalescing Filter Element (CFE) for moisture removal
    • HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001. H14 by MPPS method as per EN 1822 and OSHA compliant. All of our HEPA Vacuum Cleaners are Aerosol Leak Tested before leaving our facility.
    • An optional Wet & Dry Conversion Kit is available
    • Pneumatically (air) operated
    • Stainless Steel Type 304 Interceptor Tank.
    • Recovery capacity of 22 lbs. (10 Kg) of dust into 7.9 gallons (30 liters) of water (no oil).
    • Equipped with a heavy duty powder coated hydraulic cart for easy emptying of recovered material. Cart has SD* conductive wheels
    • Equipped with a Liquid Level Indicator.

    Technical Specs

    Specs 110412A
    Model Name SS-IT EX (HY-C) RE (CFE) HEPA
    Type (Powerhead) Pneumatic
    Venturi Single
    Venturi (diam.) 5 mm
    Minimum Compressor 15 HP
    Air Line Size (Diam.) 1/2 "
    Input Air Volume 45 CFM
    Input Air Pressure 80 PSI
    Air Flow 120 CFM
    Vacuum Pressure 120 " H20
    Suction Inlet 1.5 "
    Cart Type Hydro Cart (HYC)
    Filter Cleaning None
    Length 52 "
    Width 22 "
    Weight (Vacuum Only) 271 lbs.
    Height 50 "
       
    DOWNLOAD BROCHURE
  • Features

    • Immersion Separator "Wet (Water) Mix" - Only meant to be used with water (no oil).
    • Designed for the recovery and INERTIZATION of conductive and explosive dust, such as Aluminum, Magnesium, Zirconium and other commercial alloys, into a Liquid Immersion Bath
    • Legally certified explosion proof/dust ignition proof.
    • Less than 10 Ohms of resistivity.
    • Coalescing Filter Element (CFE) for moisture removal
    • HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001. H14 by MPPS method as per EN 1822 and OSHA compliant. All of our HEPA Vacuum Cleaners are Aerosol Leak Tested before leaving our facility.
    • An optional Wet & Dry Conversion Kit is available
    • Pneumatically (air) operated
    • Stainless Steel Type 304 Interceptor Tank.
    • Recovery capacity of 22 lbs. (10 Kg) of dust into 7.9 gallons (30 liters) of water (no oil).
    • Equipped with a Liquid Level Indicator.
    • Heavy Duty powder coated cart.

    Technical Specs

    Specs 110411
    Model Name SS-IT EX (TC) RE HEPA
    Type (Powerhead) Pneumatic
    Venturi Single
    Venturi (diam.) 5 mm
    Minimum Compressor 15 HP
    Air Line Size (Diam.) 1/2 "
    Input Air Volume 45 CFM
    Input Air Pressure 80 PSI
    Air Flow 120 CFM
    Vacuum Pressure 120 " H20
    Sound Level 74 dB(A)
    Suction Inlet 1.5 "
    Cart Type Tilt Cart (TC)
    Filter Cleaning None
    Length 29 "
    Width 27 "
    Weight (Vacuum Only) 121 lbs.
    Height 62 "
       
    DOWNLOAD BROCHURE

Go to Top