• 2D-10 (IT-40L) CFE HEPA

    Features

    • Immersion Separator "Wet (Water) Mix" - Only meant to be used with water (no oil).
    • Designed for the recovery and INERTIZATION of combustible dust into a Liquid Immersion Bath
    • Electrically Operated
    • Coalescing Filter Element (CFE) for moisture removal
    • Recovery tank made of stainless steel type 304
    • Recovery capacity: 3.25 gallons (12.3 liters) of water is required in the recovery tank. The conductive recovery bag has a recovery capacity of 3 liters. One gallon (3.8 liters) of powder can be recovered directly in the tank if the conductive recovery bag is not used
    • Degassing Vent allows gas to be evacuated automatically from the unit
    • Equipped with a Liquid Level Indicator.
    • Includes a complete static dissipative tool kit

    Technical Specs

    Specs 113186A
    Model Name 2D-10 (IT-40L) CFE HEPA
    Type (Powerhead) Electric
    Voltage 120 V
    Hertz 60 Hz
    Phase Single
    Wattage 1207 W
    Power 1.6 HP
    Amperage 10.5 amps.
    Air Flow 110 CFM
    Vacuum Pressure 107 " H20
    Sound Level 75 dB(A)
    Plug Type 120V
    Suction Inlet 1.5 "
    Cart Type 4 Wheel Dolly (4W)
    Filter Cleaning Liquid Immersion Bath
    Length 19 "
    Width 18 "
    Height 34 "
    Cord Length 35 ft.
       
    DOWNLOAD BROCHURE

  • ATEX-10A (IT-40L) CFE HEPA

    Features

    • Immersion Separator "Wet (Water) Mix" - Only meant to be used with water (no oil).
    • Designed for the recovery and INERTIZATION of combustible dust into a Liquid Immersion Bath
    • Legally certified explosion proof/dust ignition proof.
    • Coalescing Filter Element (CFE) for moisture removal
    • Pneumatically (air) operated. Can run continuously without overheating or wear
    • Recovery tank made of stainless steel type 304
    • Recovery capacity: 3.25 gallons (12.3 liters) of water is required in the recovery tank. The conductive recovery bag has a recovery capacity of 3 liters. One gallon (3.8 liters) of powder can be recovered directly in the tank if the conductive recovery bag is not used
    • Degassing Vent allows gas to be evacuated automatically from the unit
    • Equipped with a Liquid Level Indicator.
    • Includes a complete static dissipative tool kit

    Technical Specs

    Specs 113116
    Model Name ATEX-10A (IT-40L) CFE HEPA
    Type (Powerhead) Pneumatic
    Venturi Single
    Minimum Compressor 15 HP
    Air Line Size (Diam.) 1/2 "
    Input Air Volume 35-45 CFM
    Input Air Pressure 80 PSI
    Air Flow 110 CFM
    Vacuum Pressure 110 " H20
    Sound Level 68 dB(A)
    Suction Inlet 1.5 "
    Cart Type 4 Wheel Dolly (4W)
    Filter Cleaning Liquid Immersion Bath
    Length 19 "
    Width 18 "
    Height 34 "
       
    DOWNLOAD BROCHURE

  • C-10 EX (IT-40L) CFE HEPA

    Features

    • Immersion Separator "Wet (Water) Mix" - Only meant to be used with water (no oil).
    • Designed for the recovery and INERTIZATION of combustible dust into a Liquid Immersion Bath
    • Legally certified dust ignition protected by an OSHA approved Nationally Recognized Testing Laboratory (NRTL)
    • Coalescing Filter Element (CFE) for moisture removal
    • Electrically Operated
    • Recovery tank made of stainless steel type 304
    • Recovery capacity: 3.25 gallons (12.3 liters) of water is required in the recovery tank. The conductive recovery bag has a recovery capacity of 3 liters. One gallon (3.8 liters) of powder can be recovered directly in the tank if the conductive recovery bag is not used
    • Degassing Vent allows gas to be evacuated automatically from the unit
    • Equipped with a Liquid Level Indicator.
    • Includes a complete static dissipative tool kit

    Technical Specs

    Specs 113178A
    Model Name C-10 EX (IT-40L) CFE HEPA
    Type (Powerhead) Electric
    Voltage 115 V
    Hertz 60 Hz
    Phase Single
    Wattage 1207 W
    Power 1.6 HP
    Amperage 10.5 amps.
    Air Flow 110 CFM
    Vacuum Pressure 107 " H20
    Plug Type 120V
    Suction Inlet 1.5 "
    Filter Cleaning Liquid Immersion Bath
    Length 19 "
    Width 18 "
    Height 35 "
    Cord Length 35 ft.
       
    DOWNLOAD BROCHURE

  • EXP1-10 (IT-40L) EX (CFE) HEPA

    Features

    • Immersion Separator "Wet (Water) Mix" - Only meant to be used with water (no oil).
    • Designed for the recovery and INERTIZATION of combustible dust into a Liquid Immersion Bath
    • Legally certified explosion proof / dust ignition proof by an OSHA approved Nationally Recognized Testing Laboratory (NRTL)
    • Coalescing Filter Element (CFE) for moisture removal
    • Electrically Operated
    • Recovery tank made of stainless steel type 304
    • Recovery capacity: 3.25 gallons (12.3 liters) of water is required in the recovery tank. The conductive recovery bag has a recovery capacity of 3 liters. One gallon (3.8 liters) of powder can be recovered directly in the tank if the conductive recovery bag is not used
    • Degassing Vent allows gas to be evacuated automatically from the unit
    • Equipped with a Liquid Level Indicator.
    • Includes a complete static dissipative tool kit

    Technical Specs

    Specs 113152A
    Model Name EXP1-10 (IT-40L) EX (CFE) HEPA
    Type (Powerhead) Electric
    TEFC Motor Yes
    Voltage 120 V
    Hertz 60 Hz
    Phase Single
    Wattage 1000 W
    Power 1.3 HP
    Amperage 9 amps.
    Air Flow 132 CFM
    Vacuum Pressure 69 " H20
    Sound Level 78/85 dB(A)
    Plug Type Not Included
    Suction Inlet 1.5 "
    Cart Type 4 Wheel Dolly (4W)
    Filter Cleaning Liquid Immersion Bath
    Length 19 "
    Width 18 "
    Height 34 "
    Cord Length 50 ft.
       
    DOWNLOAD BROCHURE

Copyright Southern Cleaning 2021
Online Enquiry
close slider

    Your Name (required)

    Your Email (required)

    Phone

    Your Message

    Go to Top