Electrically Operated Archives

Electrically operated Industrial Vacuum Cleaner for the recovery of large quantities of coolant/oil mixed with some metal chips
The powerhead with dual By-Pass Long Life motors is mounted directly on the Recovery Tank.
The internal volume of the recovery tank is 10.6 cubic feet (300 liters). There is a basket in the upper part of the recovery tank which collects the metal chips.
The basket can hold 3.5 cubic feet (100 liters) of metal chips which allows 45 Gal. (200 liters) of coolant/oil to be recovered in the lower part of the recovery tank
If the basket is removed (or if it is not used), then 78 gal. (300 L) of coolant or cutting oil can be recovered.
The Coolant/Oil is emptied using the 2.5" drain valve
Optional Electrically Operated Discharge Pump is available for emptying the recovered coolant/oil
Four 5" (125mm) wheels allow for maximum maneuverability
A floater (liquid cut-off) is installed under the powerhead to prevent overfilling

Electrically operated Industrial Vacuum Cleaner with Self-Dumping Overturning Hopper for the recovery of large quantities of metal chips mixed with some oil/coolant
The powerhead with dual By-Pass Long Life Motors is mounted directly on the Hopper.
The internal volume of the hopper is 10.6 cubic feet (300 L). A screen inside the hopper separates the upper part from the lower part. It can recover 5.3 cubic feet (150 L) of metal chips and 40 gal. (150 L) of oil/coolant.
The metal chips are separated from the oil inside the hopper. The metal chips are recovered in the upper part of the hopper and the oil is deposited at the bottom of the hopper. The screen can be removed and 300L (10.6 cubic feet) of chips can be recovered.
The oil is emptied using the 1" drain valve.
The recovered metal chips are easily emptied using a forklift to lift and dump the contents of the hopper. There is no manual lifting required. The manually operated dumping mechanism is easy to use.
Four 5" (125mm) wheels allow for maximum maneuverability
A washable Main Cloth Filter is installed upstream from the motors

Designed for the recovery of Chips mixed with Coolant
Available in single motor and dual motor versions
Single motor is 3-stage heavy duty bypass and dual motors are two stage heavy duty bypass type
Sieve Basket separates chips from coolant. Chips stay in the basket and coolant is recovered in the recovery tank
Liquid recovery capacity of 6.08 gal. (23L) of coolant in a recovery tank and 7.13 gal. (27L) of chips in a Sieve Basket.
Filtration system consists of a main filter and mist arrestor pack
High density polyethylene recovery tank is corrosion resistant and oil resistant
Mounted on a Tilting Cart (TC) for easy disposal of recovered materials.
Silent operation
Liquid Level Indicator included
Drain Hose Assembly included
SOOW oil resistant Power Cable.

Specs	112352A	112354A
Model Name	HOGOIL-57L (TC) ELEC	HOGOIL-57L (TC) ELEC
Type (Powerhead)	Electric	Electric
Voltage	120 V	120 V
Hertz	60 Hz	60 Hz
Phase	Single	Single
Wattage	1480 W	1955 W
Power	2 HP	2.6 HP
Amperage	13.2 amps.	17 amps.
Air Flow	97 CFM	200 CFM
Vacuum Pressure	131 " H₂0	90 " H₂0
Plug Type	120V	Not Included
Suction Inlet	2 "	2 "
Cart Type	Tilt Cart (TC)	Tilt Cart (TC)
Filter Cleaning	None	None
Recovery Capacity - Sieve Basket	7.13 Gal	7.13 Gal
Wet Recovery Capacity	6.08 Gal	6.08 Gal
Width	27 "	27 "
Weight (Vacuum Only)	99 lbs.	102 lbs.
Height	43 "	43 "
Cord Length	33 ft.	35 ft.

Designed for the recovery of aluminum chips, PVC chips and all other kinds of metal chips
Can be used as an integrated part of machine operations, as well as for general cleaning of floors and machine surfaces
Continuous Duty - 24/7 cleaning
Equipped with a high flow fan.
Manual Filter Shaker (MFS) system.
For dry recovery only
Stainless Steel body (type 304) and heavy duty powder coated cart.
Detachable Recovery Tank (DT) for easy disposal of recovered materials
Mounted on a 4-wheel cart for easy maneuverability